Lechler ContiCleaner Rotary cleaner 360°
Lechler ContiCleaner for continuous interior cleaning especially for smaller working spaces
Rotary cleaner with flat jet nozzles and slide bearing made of the material PVDF / PTFE offers a spray angle of 360°. According to the principle of operation, the nozzle safely turns on at low pressure. Installation is via G ½" ISO 228 female thread and can be put into operation in any mounting position. The optimum operating pressure is 2 bar and is possible up to a maximum of 5 bar. Pre-filtering through a 50-mesh line filter ensures permanently trouble-free operation.
Rotary cleaner ContiCleaner:
Available nozzle size:
Calculation example for the selection of the ContiCleaner nozzle size:
With a rod length of 21 m and 42 nozzles in the size 03 blue results in an application rate of 126 liters. 60% to 90% of the nozzle output should be covered by the continuous internal cleaning. This results in the selection of the nozzle size 60 x 2 pieces = 120 liters.
Rotary cleaner with flat jet nozzles and slide bearing made of the material PVDF / PTFE offers a spray angle of 360°. According to the principle of operation, the nozzle safely turns on at low pressure. Installation is via G ½" ISO 228 female thread and can be put into operation in any mounting position. The optimum operating pressure is 2 bar and is possible up to a maximum of 5 bar. Pre-filtering through a 50-mesh line filter ensures permanently trouble-free operation.
Rotary cleaner ContiCleaner:
- optimized for continuous interior cleaning
- ISO color coded
- starts safely even at low pressure
- especially for smaller working widths (about 15 m) and sprayers for continuous internal cleaning without build-up of rinsing residues, below 90% of the nozzle output
- suitable for container sizes of max. ø: 1,6 m
- effective rotation cleaning with flat jet nozzles
- optimum internal cleaning of plant protection equipment containers, canisters, containers and pesticide packaging
- self-rotating without third-party drive
- robust construction
- CleanerFix Installation of cleaning nozzles without entering the tank. Easy, quick and safe replacement of cleaning nozzles in the tank.
- Extension for CleanerFix approx. 9.5 cm
Available nozzle size:
- ContiCleaner 12 (5 l / min at 3 bar)
- ContiCleaner 25 (10 l / min at 3 bar)
- ContiCleaner 30 (12 l / min at 3 bar)
- ContiCleaner 60 (25 l / min at 3 bar)
Calculation example for the selection of the ContiCleaner nozzle size:
With a rod length of 21 m and 42 nozzles in the size 03 blue results in an application rate of 126 liters. 60% to 90% of the nozzle output should be covered by the continuous internal cleaning. This results in the selection of the nozzle size 60 x 2 pieces = 120 liters.
Information Produktsicherheit
