The IDTA nozzle is an extremely low-drift, air-aspirating air injector twin flat spray nozzle for optimized deposition and reduced spray shadow at higher driving speeds.
Advantages
- High drift reduction over entire pressure range
- Nozzle in cap with MULTIJET bayonet system
- Twin flat spray jet 30°/50° with asymmetrical spray angles and flow rates
– 90°/120° gives on the target area the same spray width
– Finer droplet spectrum to the front in driving direction for optimum wetting
– Coarser, more drift-resistant droplet spectrum to the rear
– Precise border application in combination with IS border nozzle
- Optimum user protection thanks to removal/installation of the injector with protective gloves without tools (Patent)
- JKI approval for mixed equipment with ID3 nozzles with the same nozzle size in the boom center section
Features
- Nozzle size 02 – 08
- Spray angle front 120° / back 90°
- Material Ceramic
- Pressure range 1 – 4 – 8 bar
- Recommended filters 80M 02, 60M 025 – 08
- Droplet size Ultra coarse – coarse
Application areas
- Plant protection products and growth regulators
- Border application can be combined with border nozzle IS 80
- Golf course
G 2015, G 2016, G 2017, G 2018, G 2019, G 2020, G 2021, G 2022, G2043
Drift-reducing
rating Class |
Nozzle |
Use (Nozzle Distance 50 cm) |
Pressure in bar |
75% |
IDTA 120-04 |
optionally with edge nozzle IS 80-04
or mixed assembly ID3 120-04 |
2,0 bar |
90% |
IDTA 120-025 |
optionally with edge nozzle IS 80-025
or mixed assembly ID3 120-025 |
2,0 bar |
90% |
IDTA 120-03 |
optionally with edge nozzle IS 80-03
or mixed assembly ID3 120-03 |
2,0 bar |
90% |
IDTA 120-04 |
uniform assembly |
1,5 bar |
95% |
IDTA 120-05 |
uniform assembly |
1,5 bar |